Technical Selection - Static cooling ceiling system SKS-4/3-duo for concealed installation
1.1.2. Static cooling ceiling system SKS-4/3-duo, for concealed installation
High-capacity elements for installation above open, suspended ceilings; suitable for cooling rooms of different types and uses, but also usable for heating.
Data
Nominal length | 1 000 mm - 4 000 mm |
Nominal width | 400 mm - 1 200 mm |
Nominal height | 120 mm |
Pipe spacing | 100 mm |
Connection type | push-in fitting or press fitting |
Installation height | ≥ 200 mm |
Surface finish | powder coating to RAL (standard RAL 9005) |
Features
- Standard cooling capacity 216 W/m² of cooling element without suspended ceiling (with reference to EN 14 240), with high heat removal by convection and radiation
- Suitable for high cooling capacities, as required in offices with high heat loads, television studios, technical rooms, or in the industrial sector
- Uses the retention capacity of the concrete ceiling
- Design and installation of mechanical equipment and ceiling can largely occur separately
- Combinable with any air distribution system
- The basic element is copper serpentine pipework in one piece, thus long lifetime, assured quality, operating pressure up to 6 bars (consult us on higher values)
- No combustible components