Technical Selection - Contact cooling ceiling system KKS-3/LD, for metal ceilings
2.1.1. Contact cooling ceiling system KKS-3/LD, for metal ceilings
Designed for use with plane metal acoustic ceilings to make radiant cooling or heating ceilings. The permanent large-surface contact between the cooling elements and the ceiling panels is done with adhesive.
Data
Nominal length | 500 mm - 3 000 |
Nominal width | ≤ 16 pipe rows x pipe spacing |
Pipe spacing | ≥ 90 mm (standard) |
Nominal height | ≤ 15 mm |
Suspension height | ≥ 100 mm |
Connection type | push-in fitting |
Features
- Heat transfer mainly by radiation, resulting in very high thermal comfort
- Standard cooling capacity up to 75 W/m² at Δt = 8 K for KKS-3 elements glued onto metal acoustic ceiling panels made of sheet metal (to EN 14240)
- High system flexibility thanks to various element designs and sizes available; thus any type of metal ceiling can be used for cooling and the ceiling keeps all other desired properties, e.g. good sound absorption
- Low suspension height – cooling ceiling elements assembled no higher than the ceiling panel
- The core of the system is a copper serpentine pipework with aluminum heat conducting profiles, thus long service life and assured quality; operating pressure 6 bars (higher values on enquiry)
- Reduction of “grey energy” and thus well suited for Leeds, DGNB, etc. buildings
- Easy and safe Installation
- No combustible components